Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1″ Length Pack of 100

#ad
#ad
Small Parts 0816KPM #ad - Modified truss head is extra wide with a low-profile dome and integral round washer. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration.

Usually only recommended for use with metal, self-drilling screws are available with wings that enable use when fastening wood to metal. The modified truss head is extra wide with a low-profile dome and integral round washer. The zinc plating offers corrosion resistance and has a reflective appearance. The drill point length should be long enough to penetrate both materials being fastened before the threading portion reaches the material.

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1" Length Pack of 100 #ad - Zinc plating resists corrosion and has a reflective appearance. The phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener. Self-drilling screws, a type of self-tapping screw, are threaded fasteners that drill their own hole and thread it as they are installed.

The steel self-drilling screw with zinc plating has a modified truss head and a Phillips drive.

More information about Small Parts 0816KPM #ad

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/2" Length Pack of 100

#ad
#ad
Small Parts 0824KPM #ad - The zinc plating offers corrosion resistance and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Modified truss head is extra wide with a low-profile dome and integral round washer.

Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. The drill point length should be long enough to penetrate both materials being fastened before the threading portion reaches the material. The steel self-drilling screw with zinc plating has a modified truss head and a Phillips drive.

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/2" Length Pack of 100 #ad - The phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener. Self-drilling screws, a type of self-tapping screw, are threaded fasteners that drill their own hole and thread it as they are installed.

Usually only recommended for use with metal, self-drilling screws are available with wings that enable use when fastening wood to metal. The modified truss head is extra wide with a low-profile dome and integral round washer.

More information about Small Parts 0824KPM #ad


Similar products



Parts Express #8 x 3/4" Self-Tapping Truss Head Screws 100 Pcs.

#ad
#ad
Parts Express 081-465 #ad - Steel is often used in applications where strength is the primary consideration. Black oxide hardware perfect for car stereo or electronic applications. Save when you buy the 2-Pack! Modified truss head is extra wide with a low-profile dome and integral round washer. Zinc plating resists corrosion and has a reflective appearance.

Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening.

More information about Parts Express 081-465 #ad


Similar products



410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3/4" Length Pack of 25

#ad
#ad
Small Parts 1012KPM410 #ad - Zinc plating resists corrosion and has a reflective appearance. The material is magnetic. The drill point length should be long enough to penetrate both materials being fastened before the threading portion reaches the material. The modified truss head is extra wide with a low-profile dome and integral round washer.

Usually only recommended for use with metal, self-drilling screws are available with wings that enable use when fastening wood to metal. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. The 410 stainless steel material offers high strength and hardness ratings, and resists corrosion in mild environments.

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3/4" Length Pack of 25 #ad - Steel is often used in applications where strength is the primary consideration. Save when you buy the 2-Pack! The phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Self-drilling screws, a type of self-tapping screw, are threaded fasteners that drill their own hole and thread it as they are installed. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening.

More information about Small Parts 1012KPM410 #ad


Similar products



Speedi-Collar SC-06D 6-Inch Diameter Take Off Start Collar with Damper for Hvac Duct Work Connections

#ad
#ad
Applied Applications International SC-06D #ad - This speedi-collar comes with a preassembled damper that ratchets in place. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. You won't have to stick your hand inside a sharp metal collar ever again.

Save when you buy the 2-Pack! And if you pre-attach the flex duct, you can be out of the attic or crawl space in minutes, not hours. The collar was designed with the Quick-Zips located on the outside of the collar flange. It is the "one Collar that Fits All". It can be used for remodeling, Do it yourself, New Residential/Commercial HVAC projects.

Speedi-collar is molded from high density, UV resistant resin making it durable, lightweight, dent and rust-proof.410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Speedi-collar features an integral gasket, a ¾-Inch wide flange and quick-zips for an air-tight connection.

Speedi-Collar SC-06D 6-Inch Diameter Take Off Start Collar with Damper for Hvac Duct Work Connections #ad - This revolutionary start-collar features an adhesive gasket that attaches to duct board or metal trunk lines. Modified truss head is extra wide with a low-profile dome and integral round washer. You would need at least four different metal tab collars and have dozens of injury causing tabs to bend back to do the same thing.

More information about Applied Applications International SC-06D #ad


Similar products



Parts Express #8 x 1/2" Self-Tapping Truss Head Screws 100 Pcs.

#ad
#ad
Parts Express 081-460 #ad - Saves time, energy, labor, and money with all the innovations Speedi-Collar has to offer. The damper ratchet system allows you to adjust the damper into 6 different positions for optimal balancing. Plain surface has no finish or coating. Speedi-collar features an integral gasket, a ¾-Inch wide flange and quick-zips for an air-tight connection.

Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. Speedi-collar is made in the USA. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. Modified truss head is extra wide with a low-profile dome and integral round washer.

Parts Express #8 x 1/2" Self-Tapping Truss Head Screws 100 Pcs. #ad - Black oxide hardware perfect for car stereo or electronic applications. Save when you buy the 2-Pack!410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Steel is often used in applications where strength is the primary consideration. Modified truss head is extra wide with a low-profile dome and integral round washer.

Zinc plating resists corrosion and has a reflective appearance.

More information about Parts Express 081-460 #ad


Similar products



Deflecto Aluminum Duct, Semi Ridgid, Flexible, 6" x 8', Silver A068/4-A

#ad
#ad
Deflecto A068/4-A #ad - Semi-rigid for both Durability and Flexibility. Speedi-collar is made in the USA. Modified truss head is extra wide with a low-profile dome and integral round washer. Fire-resistant Aluminum. Compresses to 28 in. Fire resistant. Plain surface has no finish or coating. Aluminum duct 6" Diameter x 8' length. Zinc plating resists corrosion and has a reflective appearance.

Steel is often used in applications where strength is the primary consideration. Saves time, energy, labor, and money with all the innovations Speedi-Collar has to offer. The damper ratchet system allows you to adjust the damper into 6 different positions for optimal balancing. Save when you buy the 2-Pack!

Deflecto Aluminum Duct, Semi Ridgid, Flexible, 6" x 8', Silver A068/4-A #ad - Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. Semi-rigid but flexible for easy installation. Speedi-collar is molded from high density, UV resistant resin making it durable, lightweight, dent and rust-proof. Save when you buy the 2-Pack! Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening.

Modified truss head is extra wide with a low-profile dome and integral round washer.

More information about Deflecto A068/4-A #ad


Similar products



Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/4" Length Pack of 50

#ad
#ad
Small Parts 1020KWTF #ad - The zinc plating offers corrosion resistance and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Steel is often used in applications where strength is the primary consideration. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive.

A star drive requires use of a Torx driver for installation and removal. Self-drilling screws, a type of self-tapping screw, are threaded fasteners that drill their own hole and thread it as they are installed. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening.

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/4" Length Pack of 50 #ad - Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. Compresses to 28 in. Fire resistant. For multiple uses - bathroom or kitchen venting.

Modified truss head is extra wide with a low-profile dome and integral round washer.

More information about Small Parts 1020KWTF #ad


Similar products



Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1/2" Length Pack of 100

#ad
#ad
Small Parts 0808KPM #ad - For multiple uses - bathroom or kitchen venting. The phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener. Self-drilling screws, a type of self-tapping screw, are threaded fasteners that drill their own hole and thread it as they are installed.

Zinc plating resists corrosion and has a reflective appearance. Modified truss head is extra wide with a low-profile dome and integral round washer. Steel is often used in applications where strength is the primary consideration. Speedi-collar is made in the USA. Saves time, labor, energy, and money with all the innovations Speedi-Collar has to offer.

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1/2" Length Pack of 100 #ad - The damper ratchet system allows you to adjust the damper into 6 different positions for optimal balancing. Semi-rigid for both Durability and Flexibility. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening.

Semi-rigid but flexible for easy installation. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive.

More information about Small Parts 0808KPM #ad


Similar products



Southwire 64162122 2 Conductor 18/2 Thermostat Wire, 18-Gauge Solid Copper Class 2 Power-Circuit Cable, Brown

#ad
#ad
Southwire 64162122 #ad - Semi-rigid but flexible for easy installation. Steel is often used in applications where strength is the primary consideration. Made in the U. S. A. Modified truss head is extra wide with a low-profile dome and integral round washer. Aluminum duct 6" Diameter x 8' length. 18-gauge, class 2 power-limited circuit cable, 2 conductor, solid copper thermostat wire, brown jacket.

Rated 150-Volt. Southwire has just the right wire and cable Product you're looking for. Southwire provides a full line of products, in both copper and aluminum, For a wide range of applications. Speedi-collar is molded from high density, lightweight, UV resistant resin making it durable, dent and rust-proof.

Southwire 64162122 2 Conductor 18/2 Thermostat Wire, 18-Gauge Solid Copper Class 2 Power-Circuit Cable, Brown #ad - Save when you buy the 2-Pack! Semi-rigid for both Durability and Flexibility. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. The company leads the industry in new and innovative products that help simplify installation, saving time and money. In addition to its standard product line, Southwire can also make custom products offering its customers the most complete Line of products for almost any requirement or situation.

The two conductor Cable is flat-multiconductor cables are round.

More information about Southwire 64162122 #ad


Similar products



Box of 100 - #8 x 1/2" Phillips Modified Truss Head Self-Drilling Tek Screw, Zinc-Plated Steel for Sheet Metal Attaches wire Lath to Metal Studs

#ad
#ad
Strong-Point TRUS-ZIN850-100 #ad - Modified truss head is extra wide with a low-profile dome and integral round washer. Steel is often used in applications where strength is the primary consideration. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Great to have while working with sheet metal environment.

Aluminum duct 6" Diameter x 8' length. Sunlight resistant -20-Degree C to 60-Degree C. Installed with #2 Phillips Driver. Convenience: phillips modified truss head Sheet Metal Screws are known to be convenient and versatile. Green compliant RoHS. Made from steel, they have a Zinc Plating to resist corrosion in weather environments.

Box of 100 - #8 x 1/2" Phillips Modified Truss Head Self-Drilling Tek Screw, Zinc-Plated Steel for Sheet Metal Attaches wire Lath to Metal Studs #ad - 6 inch dia X 8-feet Length. Use these screws to secure metal wire to steel framing. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. Amazon protected Money-Back Satisfaction Guaranteed. Speedi-collar is made in the USA. Zinc plating resists corrosion and has a reflective appearance.

More information about Strong-Point TRUS-ZIN850-100 #ad


Similar products

Scroll to top